This range of Pall filter housings has been specifically designed and engineered for the filtration of air and gases. The design complements the high-flow capacities of the Pall Emflon range of sterilizing gas filter cartridges to ensure reliable and cost efficient filtration. These advanced gas filter housings are from the Pall Advanta range of housings.
Manufactured from 316L stainless steel, Pall Advanta housings are engineered to meet the requirements of the biopharmaceutical industry. Advanced manufacturing technologies are used to construct a robust housing, incorporating a high degree of automated orbital welding. Features of this advanced sanitary housing such as the surface finish, steam sterilizability, and ease of filter integrity testing have been tuned to match today’s exacting requirements both technically and economically.
Pall Advanta AVL series filter housings are L-flow pattern (in the side, out the bottom) sanitary stainless steel housings. They accommodate one single open-ended Code 7 filter cartridge of 5, 10, 20 or 30 inches (127 mm, 254 mm, 508 mm or 762 mm) nominal length. Pall Advanta AVL series housings are used for either gas or liquid applications, and are designed to meet the stringent requirements of the biopharmaceutical industry. These housings are commonly used for venting applications because of their convenient flow pattern and low pressure-loss.
The Pall Advanta range of filter housings has been specifically designed and engineered for today’s manufacturing processes. These advanced housings are manufactured from 316L stainless steeland are engineered to meet the requirements of the BioParmaceutical industry. State-of-the-art manufacturing technologies are used to construct a housing ideal for the most critical of applications.
The Pall Advanta range of filter housings has been specifically designed and engineered for today’s manufacturing processes. These advanced housings are manufactured from 316L stainless steel and are engineered to meet the requirements of the BioPharmaceutical industry. State-of-the-art manufacturing technologies are used to construct a housing ideal for the most critical of applications.
Fine filtration of liquids is a key part of many production processes. These Pall Advanta housings have been specifically designed to meet the many requirements of this demanding application. During the design process critical features were optimized to ensure trouble-free use and low installation and maintenance costs. Areas such as surface finish, suitability for CIP and SIP, integrity testing and incorporation into automated production processes are included.
Hot water tank vents-elimination of condensate to comply with current GMP Freeze dryer vacuum break filters — removal of residual water after steaming or integrity testing. Filtration of ointment bases-reduction of viscosity or liquification. Bulk active ingredient production-temperature control to avoid crystalization during filtration
PLT filter housings have been designed in accordance with the Life Sciences industry's demand for high-quality, cost-effective products. The PLT range is available in both single and multi-round style and the housing's design takes account of sanitary and GMP design requirements necessary for stainless steel products within the industry. They can be supplied in with a variety of different connection configurations and with two different surface finish options. These features combine to ensure that the PLT range of housings is suitable for the widest possible range of applications.
To meet the increasing demand for small-scale filters for laboratory use and process development, Pall has developed the Junior B series housings. These are some of the smallest stainless steel housings on the market yet can achieve very high-flow rates using specially developed Pall SBF-style pleated cartridges. For small-scale filtration this Junior range is less cumbersome than larger housings or difficult-to-use disc holders. All styles are suitable for in situ steam-sterilization in sterile processes.
Pall's P-Series filter housings are specified to meet the requirements of the pharmaceutical industry and offer a sanitary design suitable for use in many applications in biotech, vaccine or plasma fractionation processes. P-Series filter housings are available in two surface finish options:
VFK Series filter housings are specifically designed for venting applications in the food and beverage industry.
The in-line flow patter n of VFK housings ensures minimized pressure drop and user-friendly filter cartridge change-outs. They can be equipped with a variety of air/gas filter cartridges to address the various needs of the industry, efficiently protecting product and processes from airborne contamination.